Log Severity: Warning (2)
Log Message: The Agent could not open the Cluster service registry key.
Event identifier: cpqhsmsg.dll - 3872 (Hex)0x84350f20 (Service Event)
Log Severity: Warning (2)
Log Message: The specified storage class is not supported by the Agent. The Agent only supports the disk
resource class.
Event identifier: cpqhsmsg.dll - 3873 (Hex)0x84350f21 (Service Event)
Log Severity: Warning (2)
Log Message: The fibre controller resided at the storage box is off-line. The Agent only supports the disk
resource class.
Event identifier: cpqhsmsg.dll - 3874 (Hex)0x84350f22 (Service Event)
Log Severity: Warning (2)
Log Message: Could not read the registry sub-key: “%1”. This error can be caused by a corrupt registry or a
low memory condition. Rebooting the server may correct this error.
Event identifier: cpqhsmsg.dll - 3875 (Hex)0x84350f23 (Service Event)
Log Severity: Warning (2)
Log Message: Could not open enumerated network. The Cluster service may not be running. Try to restart the
Cluster service.
Event identifier: cpqhsmsg.dll - 3876 (Hex)0x84350f24 (Service Event)
Log Severity: Warning (2)
Log Message: Could not enumerate the cluster's networks. The Cluster service may not be running. Try to
restart the Cluster service.
Event Identifiers 4352-4626
Event identifier: cpqhsmsg.dll - 4352 (Hex)0x84351100 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not allocate memory. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4353 (Hex)0x84351101 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not open the base of the registry. The data contains the
error code.
Event identifier: cpqhsmsg.dll - 4354 (Hex)0x84351102 (Service Event)
Log Severity: Warning (2)
Log Message: “%1”. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4355 (Hex)0x84351103 (Service Event)
Log Severity: Warning (2)
Log Message: “%1”. The data contains the error code.
Event identifier: cpqhsmsg.dll - 4356 (Hex)0x84351104 (Service Event)
Log Severity: Warning (2)
Log Message: The External Status MIB Agent could not read the registry value “%1”. The data contains the
error code.
Event Identifiers 4352-4626 335