HPE ProLiant Gen9

For more information, see "UEFI System Utilities" in the HPE ProLiant Gen9 Troubleshooting Guide, Volume I
on the Hewlett Packard Enterprise website.
200 Series
207-DIMM configuration errors
Symptom
207-DIMM configuration errors.
Cause
An Advanced Memory Protection DIMM configuration error occurred.
Action
Install DIMMs in a supported configuration.
For more information, see the user guide on the Hewlett Packard Enterprise website.
208-Memory speed error
Symptom
208-Memory speed error.
Cause
• The memory board is not installed correctly.
• The memory board has failed.
• An issue exists with the system board.
Action
1. Reseat the memory board.
2. If the issue persists, replace the memory board.
For more information, see the maintenance and service guide on the Hewlett Packard Enterprise
website.
CAUTION:
Only authorized technicians trained by Hewlett Packard Enterprise should attempt to remove the
system board. If you believe the system board requires replacement, contact Hewlett Packard
Enterprise technical support before proceeding. For more information, see "Accessing Hewlett
Packard Enterprise Support."
3. If the issue persists, contact Hewlett Packard Enterprise support.
For more information, see "Accessing Hewlett Packard Enterprise support."
38 200 Series