HPE ProLiant Gen9

HPE ProLiant server errors
Array Diagnostics error messages
HPE Smart Storage Administrator Diagnostics Utility error messages
This section contains a complete alphabetical list of all error messages presented by the HPE Smart Storage
Administrator Diagnostics Utility in the Array Diagnostics Report.
Array status: The array has failed
Symptom
Array status: The array has failed.
Cause
A physical drive or logical drive in the array has failed.
Action
Check for failed physical or logical drives in the array and correct any issues.
For more information, see "Physical drive issues" and "Logical drive issues" in the HPE ProLiant Gen9
Troubleshooting Guide, Volume I on the Hewlett Packard Enterprise website.
Array status: The array currently has a drive erase operation queued, running, stopped or
completed on a logical or physical drive
Symptom
Array status: The array currently has a drive erase operation queued, running, stopped or completed on a
logical or physical drive.
Cause
A drive erase operation is queued, running, stopped, or has completed.
Action
No action is required.
Array Status: The array has a spare drive assigned which is smaller than the smallest data
drive in the array
Symptom
Array Status: The array has a spare drive assigned which is smaller than the smallest data drive in the array.
Some operations in the array will not be available.
Cause
The spare drive is not large enough.
HPE ProLiant server errors 7