HPE ProLiant Gen9

• FC Interconnect modules (4000–4999)
• Servers (5000–5999)
• Profiles (6000-6999)
• Ethernet Network (7000–7999)
• FC Fabric (8000–8999)
• Unknown module (9000-9999)
The events are categorized by severity which reflects the functional state of the component. The severity will
guide you on the kind of attention you should give to taking an action in the occurrence of the event. The
following is a list of the categories:
• SEVERITY_INFO
An info event is a low-level condition for out-of-service equipment, system login/logout and other non-
service affecting information. The standard event display color is black.
• SEVERITY_WARNING
A warning Alert denotes a threshold reached or error condition imminent. The standard Alert display color
is blue.
• SEVERITY_MINOR
A minor Alert is an error condition but has no service impact. The standard Alert display color is yellow.
• SEVERITY_MAJOR
A critical Alert seriously impairs service and requires immediate action. This alert indicates a service
outage or substantially diminished capacity. The standard Alert display color is red.
• SEVERITY_CRITICAL
A critical Alert seriously impairs service and requires immediate action. This alert indicates a service
outage or substantially diminished capacity. The standard Alert display color is red.
Domain events (1000-1999)
1003 - VCM-OA communication down
Severity: CRITICAL
Description: The communication between the VC management application and the active Onboard
Administrator has been interrupted.
Possible causes:
• An error has occurred during the execution of a SOAP call from the VC management application to the
Onboard Administrator. Specific known causes are:
◦ OA reboot (including firmware update)
◦ Network disconnect
◦ OA no longer in VC mode
◦ OA replaced
◦ Management network overloaded with data traffic
284 Domain events (1000-1999)