HPE ProLiant Gen9

For more information, see the maintenance and service guide on the Hewlett Packard Enterprise website.
400 Series
40X-Parallel Port X Address Assignment Conflict
Symptom
40X-Parallel Port X Address Assignment Conflict.
Cause
Both external and internal ports are assigned to parallel port X.
Action
Run the server setup utility and correct the configuration. For more information, see "UEFI System Utilities" in
the HPE ProLiant Gen9 Troubleshooting Guide, Volume I on the Hewlett Packard Enterprise website.
404-Parallel Port Address Conflict Detected
Symptom
404-Parallel Port Address Conflict Detected. A hardware conflict in your system is keeping some system
components from working correctly. If you have recently added new hardware remove it to see if it is the
cause of the conflict. Alternatively, use Computer Setup or your operating system to insure that no conflicts
exist.
Cause
A hardware conflict in the system is preventing the parallel port from working correctly.
Action
Procedure
1. If you have recently added new hardware, remove it to see if the hardware is the cause of the conflict.
For more information, see "New hardware issues" in the HPE ProLiant Gen9 Troubleshooting Guide,
Volume I on the Hewlett Packard Enterprise website.
2. Run the server setup utility to reassign resources for the parallel port and manually resolve the resource
conflict.
For more information, see "UEFI System Utilities" in the HPE ProLiant Gen9 Troubleshooting Guide,
Volume I on the Hewlett Packard Enterprise website.
3. Run Insight Diagnostics and replace failed components as indicated.
For removal and replacement procedures, see the maintenance and service guide on the Hewlett
Packard Enterprise website.
500 Series
501-PCI card needs to be in alternate slot
Symptom
501-PCI card needs to be in alternate slot.
Cause
A PCI card is installed in an incorrect slot.
400 Series 103