HPE ProLiant Gen9

Alertmail: Failed to get initial enclosure status
Alertmail: Failed to read cooling info
Alertmail: Failed to read enclosure info
Alertmail: Failed to read enclosure names
Alertmail: Failed to read enclosure status
Alertmail: Failed to read event from mgmt subsystem
Alertmail: Failed to read LCD status
Alertmail: Failed to read powersupply measurements
Alertmail: Failed to read rack topology information
Alertmail: Failed to read status of fan [value]
Alertmail: Failed to read status of Interconnect [value]
Alertmail: Failed to read status of powersupply [value]
Alertmail: Failed to read topology after event
Alertmail: Failed to register with mgmt
Alertmail: Failed to send AlertMail to [value]
Alertmail: Failed to start reboot notifier thread
Authentication and startup log messages
Log type: LOG_WARNING, Failure type: SW
sulogin: cannot open [value]
sulogin: No password file
Log type: LOG_WARNING, Failure type: Info
OA: An error occurred updating the password file
OA: can't change pwd for `[value]'
OA: Failed login attempt with user [username]
OA: incorrect password for `[username]'
OA: Onboard Administrator is rebooting
OA: password locked for `[value]'
OA: [value:username] logged out of the Onboard Administrator
Log type: LOG_CRIT, Failure type: Info
OA: daemon is exiting because of SIGTERM system will reset.
Log type: LOG_ERR, Failure type: Info
OA: can't setuid(0)
OA: unable to determine TTY name got [value]
Log type: LOG_INFO, Failure type: Info
OA: Password for `[username]' changed by system
OA: Password for `[value]' changed by user `[username]'
OA: root login [value]
240 Authentication and startup log messages