HPE ProLiant Gen9

Action
No action is required. This message can be disabled in UEFI.
For more information, see the UEFI System Utilities user guide for your product on the Hewlett Packard
Enterprise website.
1700 Series
1700-Slot # Drive Array – Please replace battery
Symptom
1700-Slot # Drive Array – Please replace battery. Caching will be enabled once the battery has been replaced
and charged.
Cause
The HPE Smart Storage battery is degraded or has failed.
Action
1. Replace the HPE Smart Storage Battery.
For more information, see the maintenance and service guide on the
Hewlett Packard Enterprise
website.
2. Charge the HPE Smart Storage Battery.
1701-Slot # Drive Array – Please install battery
Symptom
1701-Slot # Drive Array – Please install battery. Caching will be enabled once the battery is installed and
charged.
Cause
The HPE Smart Storage Battery has not been installed.
Action
Install and charge the HPE Smart Storage Battery. For more information, see the user guide on the Hewlett
Packard Enterprise website.
1702-SCSI Cable Error Detected
Symptom
1702-SCSI Cable Error Detected.
1700 Series 113