HPE ProLiant Gen9 - 100 Series

WARNING:
To avoid potential issues, ALWAYS read the warnings and cautionary information in the product
documentation before removing, replacing, reseating, or modifying system components.
IMPORTANT:
This guide provides information for multiple servers. Some information may not apply to the server you
are troubleshooting. Refer to the server documentation for information on procedures, hardware options,
software tools, and operating systems supported by the server.
100 Series
101—Option ROM Error
Symptom
101-Option ROM Error. An option ROM for a PCIe device is invalid. Action: Update the option ROM/firmware
for the PCIe device (may be an Option Card or an embedded device).
Cause
An option ROM for a PCIe device is invalid.
Action
Update the option ROM or firmware for the option card or embedded device.
For more information, see the user guide on the Hewlett Packard Enterprise website.
102-System board error
Symptom
102-System board error
Cause
An issue exists with the system board.
CAUTION:
Only authorized technicians trained by Hewlett Packard Enterprise should attempt to remove the system
board. If you believe the system board requires replacement, contact Hewlett Packard Enterprise
technical support before proceeding.
Action
Contact Hewlett Packard Enterprise technical support.
For more information, see "Accessing Hewlett Packard Enterprise support."
104-ASR Timer Failure
Symptom
104-ASR Timer Failure.
36 100 Series