HPE ProLiant Gen9

Value Meaning
0
The command was completed successfully.
1
The hardware definition data file (conrep.xml) is
corrupt or not found.
2
The system configuration data file (conrep.dat) is
corrupt or not found.
3
The Health Driver is required for this operation but is
not loaded.
4
The system administrator password is set. The
settings cannot be changed unless this password is
cleared.
5
The XML hardware definition file (conrep.xml) is
corrupt or not appropriate for the current platform.
CONREP screen output
A typical screen output generated by CONREP is similar to the following:
conrep 3.00 - Scripting Toolkit Configuration Replication Program
Copyright (c) 2007-2009 Hewlett Packard Enterprise Development LP
System Type: ProLiant DL360 G4
ROM Date: 08/16/2005
ROM Family: P52
XML System Configuration: conrep.xml
Hardware Configuration: demo.dat
File contains global platform restrictions
Global Restriction: [minimumconrepversion] OK
Platform check:
[ProLiant DL3] match
[ProLiant DL5] no match
Saving configuration data to demo.dat.
CONREP Return code: 0
CONREP screen output 301