Log Severity: Warning (2)
Log Message: The Drive Array Agent storage system table is full.
Event identifier: cpqstmsg.dll - 574 (Hex)0x8435023e (Service Event)
Log Severity: Warning (2)
Log Message: The Drive Array Agent failed to get capacity on SCSI drive because SCSI pass through IOCTL
failed.
Event identifier: cpqstmsg.dll - 768 (Hex)0x84350300 (Service Event)
Log Severity: Warning (2)
Log Message: The Remote Alerter Agent detected an invalid data type within an alert definition.
Event identifier: cpqstmsg.dll - 769 (Hex)0x84350301 (Service Event)
Log Severity: Warning (2)
Log Message: The Remote Alerter Agent detected an error while attempting to log an alert remotely. The data
contains the error code.
Event identifier: cpqstmsg.dll - 771 (Hex)0x84350303 (Service Event)
Log Severity: Warning (2)
Log Message: The Remote Alerter Agent was unable to log an event in the event log of the system named
%1. The data contains the error code.
Event identifier: cpqstmsg.dll - 772 (Hex)0xc4350304 (Service Event)
Log Severity: Error (3)
Log Message: The Remote Alerter Agent detected a null handle on initialization. The data contains the error
code.
Event identifier: cpqstmsg.dll - 773 (Hex)0xc4350305 (Service Event)
Log Severity: Error (3)
Log Message: The Remote Alerter Agent received an error on WaitForMultipleObjects call. The data contains
the error code.
Event identifier: cpqstmsg.dll - 774 (Hex)0xc4350306 (Service Event)
Log Severity: Error (3)
Log Message: The Remote Alerter Agent received an error on ResetEvent call. The data contains the error
code.
Event Identifiers 1061-1098
NT Event ID: 1061 (Hex)0xc4350425 (cpqstmsg.dll)
Log Severity: Error (3)
Event Title: Drive Array Physical Drive Threshold Exceeded.
Log Message: The physical drive in slot %4, port %5, bay %6 with serial number “%7”, has exceeded a drive
threshold.
SNMP Trap: cpqDa5PhyDrvThreshPassedTrap - 3030 in CPQIDA.MIB
Symptom: Physical Drive Threshold Passed. This trap indicates that the agent has detected a factory
threshold associated with one of the physical drive objects on a drive array, has been exceeded.
User Action: Replace the physical drive.
Supporting SNMP Trap Data:
Event Identifiers 1061-1098 341
To Next Page
Loading...
