Status number Error message
0x004E
Unable to import the SIM certificate
from the specified source.
0x004F
Insufficient room to add a SIM Server
record.
0x0050
Single Sign-On information is open for
read-only access. Write access is
required for this operation.
0x0051
The COMPUTER_LOCK value must be
"custom" to use the tag
COMPUTER_LOCK_KEY.
0x0052
Invalid COMPUTER_LOCK option; value
must be "windows", "custom",
"disabled", or "".
0x0053
COMPUTER_LOCK_KEY tag is missing;
programmable key sequence did not
change.
0x0054
Command without TOGGLE="Yes" attribute
is ignored when host power is off.
0x0055
Duplicate record exists.
0x0056
Premature operation refused.
0x0057
SSH key was not found.
0x0058
There is no user name or the user name
appended to SSH key does not exist.
0x0059
SSH key is too large for storage space.
0x005A
No available slot for additional SSH
key.
0x005B
A Trusted Platform Module (TPM) has
been detected in this system.
TPM_ENABLED needs to be set to "Yes" in
order to perform firmware update.
0x005C
Firmware image is not available or not
valid.
0x005D
Firmware flash failed.
0x005E
Open flash part failed.
0x005F
Login failed.
0x0060
RIBCL parser is busy. Retry later.
0x0061
RIBCL parser is not active. No output
is being generated.
0x0062
VLAN configuration is available on
Shared Network Port(SNP) only. Either
modify this script to enable SNP or do
it manually.
Table Continued
HPE iLO messages, traps, and errors 315
To Next Page
Loading...
