HPE ProLiant Gen9

Status number Error message
0XA5
Unable to get the hot keys.
0XA6
Demo license previously installed.
0XA7
Some parameters are defined that are
not to be specified together.
0XA8
The AHS Log can not be cleared when AHS
logging is disabled.
0XA9
Error updating the group.
0XAA
The Group SID is not valid.
0XAB
Error adding group.
0XAC
Error setting group privilege.
0XAD
Error while reading or writing SNMP
data.
0XAF
Error uninstalling the language.
0XB0
This feature requires an advanced
license key.
0XB1
There was an error on reading the data.
0XB2
There was an error on setting the data.
0XB3
Invalid port.
0XB4
Port assignments must be unique.
318 HPE iLO messages, traps, and errors