EasyManua.ls Logo

HPE ProLiant Gen9 - Page 324

HPE ProLiant Gen9
460 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Action: Make a note of the cluster network name, and then check the network for the cause of the
degraded condition.
Supporting SNMP Trap Data:
sysName
cpqHoTrapFlags
cpqClusterNetworkName
Supporting SNMP Trap Description: ”Cluster network [cpqClusterNetworkName] has become degraded.”
NT Event ID: 1170 (Hex)0xc4350492 (cpqhsmsg.dll)
Log Severity: Error (3)
Log Message: The cluster network %4 has failed.
SNMP Trap: cpqClusterNetworkFailed - 15008 in CPQCLUS.MIB
Symptom: This trap is sent any time the condition of a cluster network has failed.
User Action: Make a note of the cluster network name, and then check the network for the cause of the
failure.
Supporting SNMP Trap Data:
sysName
cpqHoTrapFlags
cpqClusterNetworkName
Supporting SNMP Trap Description: “Cluster network [cpqClusterNetworkName] has failed.”
NT Event ID:1171 (Hex)0x84350493 (cpqhsmsg.dll)
Log Severity: Warning (2)
Log Message: The cluster service on %4 has become degraded.
SNMP Trap: cpqClusterNodeDegraded - 15003 in CPQCLUS.MIB
Symptom: This trap is sent any time the condition of a node in the cluster becomes degraded.
User Action: Make a note of the cluster node name, and then check the node for the cause of the degraded
condition.
Supporting SNMP Trap Data:
sysName
cpqHoTrapFlags
cpqClusterNodeName
Supporting SNMP Trap Description: “Cluster service on [cpqClusterNodeName] has become degraded.”
NT Event ID: 1172 (Hex)0xc4350494 (cpqhsmsg.dll)
Log Severity: Error (3)
Log Message: The cluster service on %4 has failed.
SNMP Trap: cpqClusterNodeFailed - 15004 in CPQCLUS.MIB
Symptom: This trap is sent any time the condition of a node in the cluster has failed.
324 HPE Insight Management Agents for Servers for Windows

Table of Contents

Other manuals for HPE ProLiant Gen9

Related product manuals