HPE ProLiant Gen9

• cpqOsLogicalDiskIndex
• cpqOsLogicalDiskInstance
• cpqOsLogicalDiskBusyTimePercent
Supporting SNMP Trap Description: “The LogicalDisk performance instance, [cpqOsLogicalDiskInstance] is
critical with DiskBusyTime of [cpqOsLogicalDiskBusyTimePercent] percent.”
NT Event ID: 1181 (Hex)0xc435049d (cpqhsmsg.dll)
Log Severity: Error (3)
Log Message: '%4'
SNMP Trap: cpqHoCriticalSoftwareUpdateTrap - 11014 in CPQHOST.MIB
Symptom: This trap is sent to notify the user of a Critical Software Update.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqHoCriticalSoftwareUpdateData
Supporting SNMP Trap Description: “[cpqHoCriticalSoftwareUpdateData]”
Event identifier: cpqhsmsg.dll - 1792 (Hex)0x84350700 (Service Event)
Log Severity: Warning (2)
Log Message: The agent is unable to generate traps due to an error during initialization.
Event identifier: cpqhsmsg.dll - 1795 (Hex)0x84350703 (Service Event)
Log Severity: Warning (2)
Log Message: The agent is older than other components. The agent is older than the other components of the
Management Agents. Reinstall all of the Management Agents to correct this error.
Event identifier: cpqhsmsg.dll - 1796 (Hex)0x84350704 (Service Event)
Log Severity: Warning (2)
Log Message: The %1 Agent is older than other components. The %1 Agent is older than the other
components of the Management Agents. Reinstall all of the Management Agents to correct this error.
Event identifier: cpqhsmsg.dll - 1800 (Hex)0x84350708 (Service Event)
Log Severity: Warning (2)
Log Message: Unable to read security configuration information. SNMP sets have been disabled.
Event identifier: cpqhsmsg.dll - 1803 (Hex)0xc435070b (Service Event)
Log Severity: Error (3)
Log Message: Unable to load a required library. This error can be caused by a corrupt or missing file.
Reinstalling the Management Agents or running the Emergency Repair procedure may correct this error.
Event identifier: cpqhsmsg.dll - 1806 (Hex)0x8435070e (Service Event)
Log Severity: Warning (2)
Log Message: The Foundation SNMP Agent service is not running. The agent has determined that the
Foundation Agents service is not running. Stop the SNMP service and restart the Foundation Agents service.
If the error persists, reinstalling the Management Agents may correct this error.
328 HPE Insight Management Agents for Servers for Windows