HPE ProLiant Gen9 - Page 362

• cpqFcTapeCntlrWWN
• cpqFcTapeLibraryScsiBus
• cpqFcTapeLibraryScsiTarget
• cpqFcTapeLibraryScsiLun
• cpqFcTapeLibraryDoorStatus
Supporting SNMP Trap Description: “The door is [cpqFcTapeLibraryDoorStatus] for tape library.”
NT Event ID: 1176 (Hex)0x84350498 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Fibre Channel Tape Drive Status Change.
Log Message: The Fibre Channel tape drive on tape controller with world wide name “%4”, SCSI bus %5,
SCSI target %6, has a new status of %7.
SNMP Trap: cpqFcTapeDriveStatusChange - 16011 in CPQFCA.MIB
Symptom: Fibre Channel Tape Drive Status Change. This trap indicates that the agent has detected a change
in the status of a Fiber Channel Tape Drive. The variable cpqFcTapeDriveStatus indicates the current tape
status. The variable cpqFcTapeDriveScsiTarget indicates the SCSI ID of the tape drive.
User Action: If the tape is failed or is offline, check the tape and all fibre channel connections.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqFcTapeCntlrWWN
• cpqFcTapeDriveScsiBus
• cpqFcTapeDriveScsiTarget
• cpqFcTapeDriveScsiLun
• cpqFcTapeDriveStatus
Supporting SNMP Trap Description: “Status is now [cpqFcTapeDriveStatus] for a tape drive.”
NT Event ID: 1177 (Hex)0x84350499 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Fibre Channel Tape Drive Cleaning Required.
Log Message: The Fibre Channel tape drive on tape controller with world wide name “%4”, SCSI bus %5,
SCSI target %6, requires cleaning.
SNMP Trap: cpqFcTapeDriveCleaningRequired - 16012 in CPQFCA.MIB
Symptom: Fibre Channel Tape Drive Cleaning Required trap. The agent has detected a tape drive that needs
to have a cleaning tape inserted and run. This causes the tape drive heads to be cleaned.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqFcTapeCntlrWWN
362 HPE Insight Management Agents for Servers for Windows