• cpqSsChassisName
• cpqSsChassisTime
• cpqSsBackplaneIndex
• cpqSsBackplaneVendor
• cpqSsBackplaneModel
• cpqSsBackplaneSerialNumber
• cpqSsBackplaneTempStatus
Supporting SNMP Trap Description: “Storage system temperature status changed to
[cpqSsBackplaneTempStatus].”
NT Event ID: 1190 (Hex)0x843504a6 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: Storage System Power Supply Status Change.
Log Message: An enclosure attached to port %5 of storage system “%4” has a new power supply status of
%7. The enclosure model is “%6”.
SNMP Trap: cpqSsExBackplanePowerSupplyStatusChange - 8024 in CPQSTSYS.MIB
Symptom: Storage System Power Supply Status Change. The agent has detected a change in the power
supply status of a storage system. The variable cpqSsBackplaneFtpsStatus indicates the current status.
User Action: If the power supply status is degraded, restore power or replace the failed power supply.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqSsChassisName
• cpqSsChassisTime
• cpqSsBackplaneIndex
• cpqSsBackplaneVendor
• cpqSsBackplaneModel
• cpqSsBackplaneSerialNumber
• cpqSsBackplaneFtpsStatus
Supporting SNMP Trap Description: “Storage system power supply status changed to
[cpqSsBackplaneFtpsStatus].”
NT Event ID: 1191 (Hex)0x843504a7 (cpqstmsg.dll)
Log Severity: Warning (2)
Event Title: SCSI Tape Library Status Change.
Log Message: The tape library with SCSI target %6 connected to SCSI bus %5 of the controller in slot %4
has a new status of %7.
SNMP Trap: cpqTapeLibraryStatusChange - 5018 in CPQSCSI.MIB
HPE Insight Management Agents for Servers for Windows 369
To Next Page
Loading...
