HPE ProLiant Gen9

• sysName
• cpqHoTrapFlags
• cpqHeThermalDegradedAction
Supporting SNMP Trap Description: “Temperature out of range. Shutdown may occur.”
NT Event ID: 1084 (Hex)0x4435043c (cpqsvmsg.dll)
Log Severity: Information (1)
Log Message: The Thermal Temperature Condition has been set to OK. The server's temperature has
returned to its normal operating range.
SNMP Trap: cpqHe3ThermalTempOk - 6019 in CPQHLTH.MIB
Symptom: The temperature status has been set to OK. The server's temperature has returned to the normal
operating range.
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
Supporting SNMP Trap Description: “Temperature has returned to normal range.”
NT Event ID: 1085 (Hex)0xc435043d (cpqsvmsg.dll)
Log Severity: Error (3)
Log Message: A System Fan Condition has been set to failed. The system may be shut down due to this
thermal condition.
SNMP Trap: cpqHe3ThermalSystemFanFailed - 6020 in CPQHLTH.MIB
Symptom: The system fan status has been set to failed. A required system fan is not operating normally. The
system is shut down if the cpqHeThermalDegradedAction variable is set to shutdown (3).
Supporting SNMP Trap Data:
• sysName
• cpqHoTrapFlags
• cpqHeThermalDegradedAction
Supporting SNMP Trap Description: “Required fan not operating normally. Shutdown may occur.”
NT Event ID: 1086 (Hex)0x8435043e (cpqsvmsg.dll)
Log Severity: Warning (2)
Log Message: A System Fan Condition has been set to degraded. If the system fan is part of a redundancy
group, the system will not be shut down. If the system fan is not part of a redundancy group, the system may
be shut down depending on the state of the thermal degraded action value '%4'.
SNMP Trap: cpqHe3ThermalSystemFanDegraded - 6021 in CPQHLTH.MIB
Symptom: The system fan status has been set to degraded. An optional system fan is not operating normally.
Supporting SNMP Trap Data:
HPE Insight Management Agents for Servers for Windows 405