HQ Pro-sTitcher - To Select One or more Designs; To Select a Single Design; To Choose and Group Multiple Designs

09/01/13www.HandiQuilter.com Overview | 4.7
To select one or more designs
• Press Select to select one or more design in the work area. A series of buons appears for selecng
one or more design.
Aer you select a design, its name appears at the top of the screen.
To select a single design
• Select Single to select one design at a me. Touch any design in the work area or choose the name
of the design from the pop-up that appears.
Pro-Stcher displays selected designs with black lines in the work area. Designs that aren’t selected designs
appear with gray lines.
To choose and group mulple designs
• Select Mul to select mulple designs. Then touch each design in the work area that you want to
include in a grouped design. Then select Group to treat the selected designs as if they were a single
design.
Pro-Stcher gives the group a name and a number and displays the selected group in black with a bounding
box around it. If you have created mulple groups, select the Group buon and choose the group you want
to work with from the pop-up box that appears.
If you Baseline a group, the designs are merged and the group is treated as a single design.
Aer creang a group, you will not be able to work with the designs individually. However, the following
acons may be performed on a Group:
• Change the stch order
Selected designs
appear in black with
a blue bounding box
around them.
Choose All to select
all designs or
None to cancel any
selecons.
The checkmark next
to the design name
indicates it is
selected.