HQ Pro-sTitcher - To Horizontally Wrap the Design Window; To Vertically Wrap the Design Window

09/01/135.22 | Design Menu www.HandiQuilter.com
To horizontally wrap the design window
Choose from the opons along the boom of the screen to specify how to wrap the designs window
horizontally.
• To shi all rows horizontally by half of the width of the design, select the 1/2 buon.
• Select the right arrow buon to shi all rows to the right by 1/8 inch.
• Select the le arrow buon to shi all rows to the le by 1/8 inch.
• Or touch the number box under Window and use the number pad to enter a decimal value to shi
the repeated designs. For example, to move all rows by one inch to the right, enter 1. To move all
rows by one inch to the le, enter -1. When you select Enter, the rows all shi accordingly.
To vercally wrap the design window
Choose from several Window opons along the right side of the screen to specify how to wrap the design
window vercally.
• To shi all rows by half of the height of the design, select the 1/2 buon.
• Select the up arrow buon to shi all rows up by 1/8 inch.
• Select the down arrow buon to shi all rows down by 1/8 inch.
Shis all rows of
repeated designs by
1/8 inch to the right
or le.
Shis all rows of
repeated designs by
half of the width of
the design.
Shis all columns of
repeated designs by
1/8 inch up or down.
Shis all columns of
repeated designs by
half of the height of
the design.