HQ Pro-sTitcher - To Adjust Stitches Per Inch While Quilting; To Manage the Tieoff Settings While Quilting

09/01/137.6 | Quilt Menu www.HandiQuilter.com
• Select the Auto Jump box to specify the maximum length (in inches) of a jump, or gap in a design
path. A number pad appears on the screen for you to enter the number, then press Enter.
Alternately, use the Plus Sign (+) to increase or Minus Sign (–) to decrease the number.
To adjust stches per inch while quilng
• Enter the number of stches per inch for quilng the design. A number pad appears on the screen
for you to enter a number, then press Enter. Alternately, use the Plus Sign (+) to increase or Minus
Sign (–) to decrease the number.
Machine Quilting Tip: The best stitches per inch setting for your design
Smaller designs, especially designs that have lots of curves and circles, may require a shorter
stch length, such as 12 to 18 stches per inch. Less intricate designs with large curves or
circles can use a larger stch length, such as 10 stches per inch.
To manage the eo sengs while quilng
Indicate how to e o the stching at jump points and at the start and end of a design. For more
informaon about the eo sengs, see Control how Pro-Stcher performs e-os in chapter 8, Sengs
Menu.
Change the auto jump
threshold by entering
a number or using the
Plus Sign to increase
or the Minus Sign to
decrease.
Change the number
of stches per inch by
entering a number or
using the Plus Sign to
increase or Minus Sign
to decrease.