HQ Pro-sTitcher - To Align a Triangle Design

09/01/13www.HandiQuilter.com Design Menu | 5.27
To vercally align blocks within an area
To align a triangle design
1. Load a design.
2. Create a triangle-shaped area using Mul-point.
3. Select Design, then Skew/Align.
4. Select the Horiontal Alignment
Align Le buon.
Align Boom: Aligns
the boom of the
design’s bounding box
with the lowest point
of the area.
Vercal Stretch:
Stretches or shrinks
the design so the top
of the bounding box
aligns with the highest
point of the area and
the boom of the
bounding box aligns
with the lowest point
of the area.
Align Top: Aligns the
top of the design’s
bounding box with
the top of the area
(pictured).
Align Center: Aligns
the vercal center of
the design’s bounding
box with the vercal
center of the area.