HQ Pro-sTitcher - To Reposition a Design Up, Down, Left, or Right

09/01/13www.HandiQuilter.com Design Menu | 5.35
To reposion a design up, down, le, or right
• To reposion the design a specic amount in any of the four direcons, enter a distance (in inches)
in the Nudge number box and then press the appropriate arrow to nudge the design up, down, le,
or right. This is especially useful if you want to nudge the design in minute increments.
Machine Quilting Tip: To nudge the design in tiny increments
By default the nudge distance is set to one tenth (.10) of an inch. To nudge the machine in
smaller, more minute increments, change this value to one hundredth (.01) of an inch.