HQ Pro-sTitcher User Manual

09/01/135.18 | Design Menu www.HandiQuilter.com
Repeat Menu
The Repeat Main funcon provides several opons for repeang a design.
• Select Design, Repeat, and then Main.
The Repeat Wrapping funcon provides several opons for wrapping, or oseng, designs. Most of these
opons can be done with or without a dened area.
• Select Design, Repeat, and then Wrapping.
Using a dened area in conjuncon with the Repeat opons will stretch, skew, or t the desired number
of repeats within that area. If an area has not been dened, the opons to stretch and t will be disabled
because they require an area to stretch or t to.
Repeat Main
To repeat a design
• Press the Plus Sign (+) to increase the number of mes you want to repeat a design. To decrease
the number of repeats that appear on-screen, press the Minus Sign (–).
• Alternately, tap on the number box and enter the desired number of repeats into the pop-up
number box. Then press Enter.
NOTE: If the repeated design includes jump points, Pro-Stcher preserves them when you save the
design.
To change the size of the gap between repeated designs
• Enter a value (in inches) in either the Horizontal Distance box or the Vercal Distance box to
increase the size of the gap between repeated designs. To overlap the designs, enter a negave
value.
Vercal repeat
opons: Enter the
number of repeats,
or press the Plus
Sign to increase the
number of repeats
or the Minus Sign to
decrease the number
of repeats.
Horizontal repeat
opons: Enter the
number of repeats,
or press the Plus
Sign to increase the
number of repeats
or the Minus Sign to
decrease the number
of repeats.
Increase or decrease the size of the gap
between repeated designs with the
Distance boxes.
GAP
!

HQ Pro-sTitcher Specifications

General

Brand	HQ
Model	Pro-sTitcher
Category	Sewing Machine
Language	English