Huawei quidway s7700 - Page 311

Configuration Files
l Configuration file of PE1
#
sysname PE1
#
vlan batch 10 30
#
ip vpn-instance vpn1
route-distinguisher 100:1
vpn frr route-policy vpn_frr_rp
vpn-target 111:1 export-extcommunity
vpn-target 111:1 import-extcommunity
#
mpls lsr-id 1.1.1.1
mpls
label advertise non-null
#
mpls ldp
#
interface Vlanif10
ip address 100.1.1.1 255.255.255.252
mpls
mpls ldp
#
interface Vlanif30
ip address 100.2.1.1 255.255.255.252
mpls
mpls ldp
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 30
port hybrid untagged vlan 30
#
interface LoopBack1
ip address 1.1.1.1 255.255.255.255
#
bgp 100
peer 2.2.2.2 as-number 100
peer 2.2.2.2 connect-interface LoopBack1
peer 3.3.3.3 as-number 100
peer 3.3.3.3 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 2.2.2.2 enable
peer 3.3.3.3 enable
#
ipv4-family vpnv4
policy vpn-target
peer 2.2.2.2 enable
peer 3.3.3.3 enable
#
ipv4-family vpn-instance vpn1
import-route direct
#
ospf 1
area 0.0.0.0
network 100.1.1.0 0.0.0.3
network 100.2.1.0 0.0.0.3
network 1.1.1.1 0.0.0.0
#
ip ip-prefix vpn_frr_list permit 2.2.2.2 32
#
route-policy vpn_frr_rp permit node 10
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
296