Huawei quidway s7700 - Example for Configuring Inter-AS Kompella VPLS Option a

#
sysname PE2
#
vlan batch 40 50
#
mpls lsr-id 4.4.4.4
mpls
#
mpls l2vpn
#
vsi a1 static
pwsignal ldp
vsi-id 3
peer 3.3.3.3
#
mpls ldp
#
isis 1
network-entity 10.0000.0000.0004.00
#
interface Vlanif40
ip address 200.1.1.2 255.255.255.0
isis enable 1
mpls
mpls ldp
#
interface Vlanif50
l2 binding vsi a1
#
interface GigabitEthernet1/0/0
port link-type trunk
port default vlan 40
#
interface GigabitEthernet2/0/0
port link-type trunk
port default vlan 50
#
interface LoopBack1
ip address 4.4.4.4 255.255.255.255
isis enable 1
#
return
l Configuration file of CE2
#
sysname CE2
#
vlan batch 50
#
interface Vlanif50
ip address 10.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 50
#
return
7.13.8 Example for Configuring Inter-AS Kompella VPLS Option A
Networking Requirements
As shown in Figure 7-19, CE1 and CE2 belong to the same VPLS, and access the backbone
network through PE1 in AS 100 and PE2 in AS 200 respectively.
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 7 VPLS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
788