Huawei quidway s7700 User Manual

#
bgp 65420
peer 10.3.1.2 as-number 100
#
ipv4-family unicast
undo synchronization
peer 10.3.1.2 enable
#
return
l Configuration file of CE4
#
sysname CE4
#
vlan batch 40
#
interface Vlanif 40
ip address 10.4.1.1 255.255.255.252
#
interface GigabitEthernet1/0/2
port hybrid pvid vlan 40
port hybrid untagged vlan 40
#
bgp 65420
peer 10.1.1.2 as-number 100
#
ipv4-family unicast
undo synchronization
peer 10.4.1.2 enable
#
return
1.9.2 Example for Binding a Tunnel to the Martini L2VPN
Networking Requirements
As shown in Figure 1-3, Site 1, Site 2, and Site 3 belong to VPNA. The networking requirements
are as follows:
l Configuring a Martini L2VPN
l The communication between Site 1 and Site 2 is independent of that between Site 1 and
Site 3.
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 1 VPN Tunnel Management Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
42

Huawei quidway s7700 Specifications

General

Hot Swappable Fans	Yes
IPv4 Routing	Yes
IPv6 Routing	Yes
MPLS	Yes
VLAN Support	Yes
QoS Support	Yes
Operating Temperature	0°C to 45°C
Operating Humidity	5% to 95% (non-condensing)
Product Type	Switch
Management	CLI, SNMP
Storage Temperature	-40°C to 70°C
Power Consumption	Varies by configuration
Slot Quantity	3 (S7703); 6 (S7706); 12 (S7712)