Huawei quidway s7700 - Page 56

area 0.0.0.0
network 100.1.1.0 0.0.0.3
network 2.2.2.2 0.0.0.0
mpls-te enable
#
tunnel-policy policy1
tunnel binding destination 1.1.1.1 te Tunnel1/0/2
#
tunnel-policy policy2
tunnel select-seq cr-lsp lsp load-balance-number 1
#
return
l Configuration file of CE1
#
sysname CE1
#
vlan batch 30
#
interface Vlanif30
ip address 10.1.1.1 255.255.255.252
#
interface GigabitEthernet1/0/3
port hybrid pvid vlan 30
port hybrid untagged vlan 30
#
bgp 65410
peer 10.1.1.2 as-number 100
#
ipv4-family unicast
undo synchronization
peer 10.1.1.2 enable
#
return
l Configuration file of CE2
#
sysname CE2
#
vlan batch 20
#
interface vlanif 20
ip address 10.2.1.1 255.255.255.252
#
interface GigabitEthernet1/0/2
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
bgp 65410
peer 10.2.1.2 as-number 100
#
ipv4-family unicast
undo synchronization
peer 10.2.1.2 enable
#
return
l Configuration file of CE3
#
sysname CE3
#
vlan batch 50
#
interface Vlanif50
ip address 10.3.1.1 255.255.255.252
#
interface GigabitEthernet1/0/3
port hybrid pvid vlan 50
port hybrid untagged vlan 50
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 1 VPN Tunnel Management Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
41