EasyManua.ls Logo

Huawei quidway s7700 - Binding the GRE Tunnel with the VPN to Which CE Belongs on PE

Huawei quidway s7700
833 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
tunnel-protocol gre
The tunnel is encapsulated as a GRE tunnel.
Step 4 Run:
source { source-ip-address | interface-type interface-number }
The source address or source interface of the tunnel interface is configured.
NOTE
The virtual IP address of the VRRP backup group can be configured as the source address of the GRE
tunnel.
The source interface of the tunnel cannot be the interface of the tunnel, but can be specified as
the interface of another tunnel.
The source address of the tunnel specified on the PE is identical with the destination address of
the tunnel specified on the CE. The destination address of the tunnel specified on the PE is
identical with the source address of the tunnel specified on the CE.
Step 5 Run:
destination [ vpn-instance vpn-instance-name ] ip-address
The destination address of the tunnel interface is configured.
If the tunnel passes through another VPN, the parameter vpn-instance vpn-instance-name need
to be specified. If the tunnel passes through the public network, the parameter is not required.
Step 6 (Optional) Run:
mtu mtu
The MTU of the interface is modified. The new MTU takes effect only after you run the
shutdown and the undo shutdown commands in succession on the interface.
Step 7 Choose one of the following commands to configure the IP address of the tunnel interface.
l Run the ip address ip-address { mask | mask-length } [ sub ] command to configure the IP
address of the tunnel interface.
l Run the ip address unnumbered interface interface-type interface-number command to
configure IP unnumbered for the tunnel interface.
----End
2.4.4 Binding the GRE Tunnel with the VPN to Which CE belongs
on PE
Bind the tunnel interface on the PE that connects the CE to a VPN instance. Then, the tunnel
interface becomes a VPN interface. The packets sent from the VPN interface are forwarded
based on forwarding information in the VPN instance.
Context
Do as follows on the PE.
Procedure
Step 1 Run:
system-view
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 2 GRE Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
68

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals