EasyManua.ls Logo

Huawei quidway s7700 - Configuring PW Switching; Establishing the Configuration Task

Huawei quidway s7700
833 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrator PW : no
session state : up
AC state : up
VC state : up
VC ID : 100
VC type : VLAN
destination : 6.6.6.6
local group ID : 0 remote group ID : 0
local VC label : 23552 remote VC label : 23552
local AC OAM State : up
local PSN State : up
local forwarding state : forwarding
local status code : 0x0
remote AC OAM state : up
remote PSN state : up
remote forwarding state: forwarding
remote status code : 0x0
BFD for PW : unavailable
manual fault : not set
active state : active
forwarding entry : exist
link state : up
local VC MTU : 1500 remote VC MTU : 1500
local VCCV : cw alert lsp-ping bfd
remote VCCV : cw alert lsp-ping bfd
local control word : enable remote control word : enable
tunnel policy name : --
traffic behavior name : --
PW template name : pwt
primary or secondary : primary
VC tunnel/token info : 1 tunnels/tokens
NO.0 TNL type : lsp , TNL ID : 0x4800200f
create time : 0 days, 1 hours, 57 minutes, 30 seconds
up time : 0 days, 1 hours, 57 minutes, 30 seconds
last change time : 0 days, 1 hours, 57 minutes, 30 seconds
VC last up time : 2010/12/10 20:33:37
VC total up time : 0 days, 1 hours, 57 minutes, 30 seconds
CKey : 9
NKey : 8
PW redundancy mode : --
AdminPw interface : --
AdminPw link state : --
Run the display mpls l2vc remote-info command. You can see that Peer Addr is the peer
address of a specified VC. For example:
<Quidway> display mpls l2vc remote-info
Total remote ldp vc : 1
Transport Group Peer Remote Remote C MTU/ N S
VC ID ID Addr Encap VC Label Bit CELLS Bit Bit
100 0 192.3.3.3 vlan 23552 0 1500 1 0
6.6 Configuring PW Switching
This section describes how to configure a multi-hop switching PW. When the multi-hop
switching PW forwards traffic, PW label switching occurs.
6.6.1 Establishing the Configuration Task
Before configuring a switching PW, familiarize yourself with the applicable environment,
complete the pre-configuration tasks, and obtain the required data. This can help you complete
the configuration task quickly and accurately.
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 6 PWE3 Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
560

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals