EasyManua.ls Logo

Huawei quidway s7700 - Configuring UPE; Checking the Configuration

Huawei quidway s7700
833 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7.5.3 Configuring UPE
This part describes how to configure a UPE to establish the VSI peer relationships with SPEs.
Context
The configuration of the UPE is similar to that on the PE of the VPLS fully-connected network.
The difference is that the UPE sets up connections only with the connected SPEs.
For the detailed configuration, see 7.4 Configuring Martini VPLS.
7.5.4 Checking the Configuration
After HVPLS in LDP mode is configured, you can view information about local VSIs, remote
VSIs, outgoing interfaces of VSI PWs, and the tunnel policy referenced by the VSIs.
Prerequisite
The configurations of the LDP HVPLS function are complete.
Procedure
l Run the display vsi [ name vsi-name ] [ verbose ] command to check information about
the VPLS VSI.
l Run the display vsi pw out-interface [ vsi vsi-name ] command to check information about
the outgoing interface of the VSI PW.
l Run the display l2vpn vsi-list tunnel-policy policy-name command to check information
about the tunnel policy used by the VSI.
l Run the display vsi remote ldp [ router-id ip-address ] [ pw-id pw-id ] command to check
information about the remote VSI.
----End
Example
Run the display vsi [ name vsi-name ] [ verbose ] command. You can view that the item "VSI
State" is displayed as "up". If verbose is selected, the item "Signaling" is displayed as "ldp" and
the item "VSI State" is displayed as "up". This means that the configuration succeeds. For
example:
<Quidway> display vsi name vsi123 verbose
***VSI Name : vsi123
Administrator VSI : no
Isolate Spoken : disable
VSI Index : 0
PW Signaling : ldp
Member Discovery Style : static
PW MAC Learn Style : unqualify
Encapsulation Type : vlan
Encapsulation Type : vlan
MTU : 1500
Diffserv Mode : uniform
Mpls Exp : --
DomainId : 255
Domain Name :
Ignore AcState : disable
Multicast Fast Swicth : disable
Create Time : 0 days, 3 hours, 30 minutes, 31 seconds
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 7 VPLS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
699

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals