It is required to adopt Option A to implement inter-AS Kompella VPLS. The interfaces that
connect ASBR-PEs serve as AC interfaces to which VSIs are bound, that is, the interfaces are
exclusively used by the VPLS.
Figure 7-19 Networking diagram for configuring inter-AS Kompella VPLS Option A
GE1/0/0
CE1
PE1
Loopback1
1.1.1.1/32
GE2/0/0
GE1/0/0
GE2/0/0
CE2
PE2
Loopback1
3.3.3.3/32
Loopback1
4.4.4.4/32
GE2/0/0
GE1/0/0
GE1/0/0
Loopback1
2.2.2.2/32
GE2/0/0
GE1/0/0
GE1/0/0
ASBR-PE2ASBR-PE1
VPLS Backbone
AS 100
VPLS Backbone
AS 200
Device Interface VLANIF Interface IP Address
PE1 GigabitEthernet 1/0/0 VLANIF 10 -
GigabitEthernet 2/0/0 VLANIF 20 100.1.1.1/24
Loopback1 - 1.1.1.1/32
ASBR-PE1 GigabitEthernet 1/0/0 VLANIF 20 100.1.1.2/24
GigabitEthernet 2/0/0 VLANIF 30 -
Loopback1 - 2.2.2.2/32
ASBR-PE2 GigabitEthernet 1/0/0 VLANIF 30 -
GigabitEthernet 2/0/0 VLANIF 40 100.3.1.1/24
Loopback1 - 3.3.3.3/32
PE2 GigabitEthernet 1/0/0 VLANIF 40 100.3.1.2/24
GigabitEthernet 2/0/0 VLANIF 50 -
Loopback1 - 4.4.4.4/32
CE1 GigabitEthernet 1/0/0 VLANIF 10 10.1.1.1/24
CE2 GigabitEthernet 1/0/0 VLANIF 60 10.1.1.2/24
Configuration Roadmap
The configuration roadmap is as follows:
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 7 VPLS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
789
To Next Page
Loading...
