Huawei quidway s7700 - Page 422

l Configuration file of Hub-PE
#
sysname Hub-PE
#
ipv6
#
vlan batch 10 20 30 40
#
ipv6 vpn6-instance vpn_in
route-distinguisher 100:21
vpn-target 100:1 import-extcommunity
#
ipv6 vpn6-instance vpn_out
route-distinguisher 100:22
vpn-target 200:1 export-extcommunity
#
mpls lsr-id 2.2.2.9
mpls
#
mpls ldp
#
interface Vlanif10
ip address 10.1.1.2 255.255.255.0
mpls
mpls ldp
#
interface Vlanif20
ip address 11.1.1.2 255.255.255.0
mpls
mpls ldp
#
interface Vlanif30
ipv6 enable
ipv6 binding vpn6-instance vpn_in
ipv6 address 2003::2/64
#
interface Vlanif 40
ipv6 enable
ipv6 binding vpn6-instance vpn_in
ipv6 address 2004::2/64
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 30
port hybrid untagged vlan 30
#
interface GigabitEthernet3/0/1
port hybrid pvid vlan 40
port hybrid untagged vlan 40
#
interface LoopBack1
ip address 2.2.2.9 255.255.255.255
#
bgp 100
peer 1.1.1.9 as-number 100
peer 1.1.1.9 connect-interface LoopBack1
peer 3.3.3.9 as-number 100
peer 3.3.3.9 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 1.1.1.9 enable
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 4 BGP MPLS IPv6 VPN Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
407