EasyManua.ls Logo

Huawei quidway s7700 - Page 499

Huawei quidway s7700
833 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VC last up time : 2010/12/01 10:00:00
VC total up time : 0 days, 2 hours, 20 minutes, 0 seconds
CKey : 5
NKey : 3
PW redundancy mode : --
AdminPw interface : --
AdminPw link state : --
reroute policy : delay 30 s, resume 10 s
reason of last reroute : --
time of last reroute : -- days, -- hours, -- minutes, -- seconds
delay timer ID : -- residual time :--
resume timer ID : -- residual time :--
Run the display mpls l2vc remote-info command, and you can see that Peer Addr is the peer
address of the VC. The following is an example:
<Quidway> display mpls l2vc remote-info
Total remote ldp vc : 2
Transport Group Peer Remote Remote C MTU/ N S
VC ID ID Addr Encap VC Label Bit CELLS Bit Bit
100 0 11.11.11.11 vlan 23552 1 1500 1 0
200 0 11.11.11.11 vlan 23552 1 1500 1 0
Run the display mpls l2vpn connection interface command, and you can see that the local VC
status and remote VC status of the master PW and the backup PW are both Up, the forwarding
state of the master PW is true, and the forwarding state of the backup PW is false. The BFD
session is Up.
<Quidway> display mpls l2vpn connection interface vlanif 11
conn-type: remote
local vc state: up
remote vc state: up
local ce-id: 1
local ce name: ce1
remote ce-id: 2
intf(state,encap): Vlanif11(up,vlan)
peer id: 3.3.3.3
route-distinguisher: 100:2
local vc label: 23552
remote vc label: 23553
tunnel policy: p1
primary or secondary: primary
forwardEntry exist or not: true
forward entry active or not:true
manual fault set or not: not set
AC OAM state: up
BFD for PW session index: 256
BFD for PW state: up
BFD for LSP state: true
Local C bit is set, Remote C bit is set
tunnel type: cr lsp, id: 0x20002
conn-type: remote
local vc state: up
remote vc state: up
local ce-id: 1
local ce name: ce1
remote ce-id: 3
intf(state,encap): Vlanif11(up,vlan)
peer id: 2.2.2.2
route-distinguisher: 100:3
local vc label: 31745
remote vc label: 35843
tunnel policy: default
primary or secondary: secondary
forwardEntry exist or not: true
forward entry active or not:false
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 5 VLL Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
484

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals