vlan batch 10
#
interface Vlanif10
 ip address 100.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
 port link-type trunk
 port trunk allow-pass vlan 10
#
return
l Configuration file of PE1
#
 sysname PE1
#
 vlan batch 10 20
#
 mpls lsr-id 1.1.1.9
 mpls
#
 mpls l2vpn
  mpls l2vpn default martini
#
mpls ldp
#
 mpls ldp remote-peer 3.3.3.9
 remote-ip 3.3.3.9
#
interface Vlanif10
 mpls l2vc 3.3.3.9 101
#
interface Vlanif20
 ip address 10.1.1.1 255.255.255.0
 mpls
 mpls ldp
#
interface GigabitEthernet1/0/0
 port link-type trunk
 port trunk allow-pass vlan 10
#
interface GigabitEthernet2/0/0
 port link-type trunk
 port trunk allow-pass vlan 20
#
interface LoopBack1
 ip address 1.1.1.9 255.255.255.255
#
ospf 1
 area 0.0.0.0
  network 1.1.1.9 0.0.0.0
  network 10.1.1.0 0.0.0.255
#
return
l Configuration file of P
#
 sysname P
#
 vlan batch 20 30
#
 mpls lsr-id 2.2.2.9
 mpls
#
mpls ldp
#
interface Vlanif 20
 ip address 10.1.1.2 255.255.255.0
 mpls
 mpls ldp
#
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 5 VLL Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
509