Huawei quidway s7700 - Page 528

primary
CE1 and CE2 can ping each other.
<CE1> ping 30.1.1.2
PING 30.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 30.1.1.2: bytes=56 Sequence=1 ttl=255 time=24 ms
Reply from 30.1.1.2: bytes=56 Sequence=2 ttl=255 time=26 ms
Reply from 30.1.1.2: bytes=56 Sequence=3 ttl=255 time=24 ms
Reply from 30.1.1.2: bytes=56 Sequence=4 ttl=255 time=51 ms
Reply from 30.1.1.2: bytes=56 Sequence=5 ttl=255 time=48 ms
--- 30.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 24/34/51 ms
----End
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 30.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
return
l Configuration file of PE
#
sysname PE
#
vlan batch 10 20
#
mpls lsr-id 1.1.1.9
mpls
#
mpls l2vpn
#
interface Vlanif10
#
interface Vlanif20
ip address 10.1.1.1 255.255.255.0
mpls
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrif tagged vlan 10
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 20
port hybrif tagged vlan 20
#
#
ccc CE1-CE2 interface Vlanif 10 in-label 100 out-label 200 nexthop 10.1.1.2
#
interface LoopBack1
ip address 1.1.1.9 255.255.255.255
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 5 VLL Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
513