<ASBR-PE2> display mpls l2vc interface Vlanif 30
*client interface       : Vlanif30 is up
  session state          : up
  AC state               : up
  VC state               : up
  VC ID                  : 100
  VC type                : VLAN
  destination            : 4.4.4.9
  local group ID         : 0            remote group ID      : 0
  local VC label         : 23552        remote VC label      : 23552
  local AC OAM State     : up
  local PSN State        : up
  local forwarding state : forwarding
  local status code      : 0x0 
  remote AC OAM state    : up
  remote PSN state       : up
  remote forwarding state: forwarding
  remote statuscode      : 0x0 
  BFD for PW             : disable
  manual fault           : not set
  active state           : active
  forwarding entry       : exist
  link state             : up
  local VC MTU           : 1500         remote VC MTU        : 1500
  local VCCV             : Disable
  remote VCCV            : Disable
  local control word     : disable      remote control word  : disable
  tunnel policy          : --
  traffic behavior       : --
  PW template name       : --
  primary or secondary   : primary
  VC tunnel/token info   : 1 tunnels/tokens
    NO.0  TNL type : lsp   , TNL ID : 0x20001
  create time            : 0 days, 0 hours, 5 minutes, 31 seconds
  up time                : 0 days, 0 hours, 4 minutes, 54 seconds
  last change time       : 0 days, 0 hours, 4 minutes, 54 seconds
  VC last up time : 20009-11-24 12:31:31
  VC total up time: 0 days, 2 hours, 12 minutes, 51 seconds  
  CKey                   : 17                                                     
  NKey                   : 18   
  PW redundancy mode     : --                                                   
  AdminPw interface      : --                                                   
  AdminPw link state     : -- 
CE1 and CE2 can ping each other.
Take the display on CE1 for example.
<CE1> ping 100.1.1.2
  PING 100.1.1.2: 56  data bytes, press CTRL_C to break
    Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=172 ms
    Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=156 ms
    Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=156 ms
    Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=156 ms
    Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=156 ms
  --- 100.1.1.2 ping statistics ---
    5 packet(s) transmitted
    5 packet(s) received
    0.00% packet loss
    round-trip min/avg/max = 156/159/172 ms
----End
Configuration Files
l Configuration file of CE1
#
 sysname CE1
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 5 VLL Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
525