Huawei quidway s7700 - Page 607

local status code : 0x0
remote AC OAM state : up
remote PSN state : up
remote forwarding state: forwarding
remote status code : 0x0
BFD for PW : unavailable
manual fault : not set
active state : active
forwarding entry : exist
link state : up
local VC MTU : 1500 remote VC MTU : 1500
local VCCV : alert lsp-ping bfd
remote VCCV : alert lsp-ping bfd
local control word : disable remote control word : disable
tunnel policy : --
traffic behavior : --
PW template name : --
primary or secondary : primary
VC tunnel/token info : 1 tunnels/tokens
NO.0 TNL type : lsp , TNL ID : 0x4800200f
create time : 0 days, 0 hours, 7 minutes, 16 seconds
up time : 0 days, 0 hours, 5 minutes, 6 seconds
last change time : 0 days, 0 hours, 5 minutes, 6 seconds
VC last up time : 2010/01/14 19:10:07
VC total up time : 0 days, 3 hours, 28 minutes, 39 seconds
CKey : 8
NKey : 7
PW redundancy mode : --
AdminPw interface : --
AdminPw link state : --
CE1 and CE2 can ping each other.
Take the display on CE1 for example.
<CE1> ping 100.1.1.2
PING 100.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 100.1.1.2: bytes=56 Sequence=1 ttl=255 time=31 ms
Reply from 100.1.1.2: bytes=56 Sequence=2 ttl=255 time=10 ms
Reply from 100.1.1.2: bytes=56 Sequence=3 ttl=255 time=5 ms
Reply from 100.1.1.2: bytes=56 Sequence=4 ttl=255 time=2 ms
Reply from 100.1.1.2: bytes=56 Sequence=5 ttl=255 time=28 ms
--- 100.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/15/31 ms
----End
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 100.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
return
l Configuration file of PE1
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 6 PWE3 Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
592