EasyManua.ls Logo

Huawei quidway s7700 - Page 663

Huawei quidway s7700
833 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[P1] interface vlanif 20
[P1-Vlanif20] ip address 10.1.1.2 24
[P1-Vlanif20] quit
[P1] interface vlanif 30
[P1-Vlanif30] ip address 20.1.1.1 24
[P1-Vlanif30] quit
[P1] ospf 1
[P1-ospf-1] area 0.0.0.0
[P1-ospf-1-area-0.0.0.0] network 10.1.1.0 0.0.0.255
[P1-ospf-1-area-0.0.0.0] network 20.1.1.0 0.0.0.255
[P1-ospf-1-area-0.0.0.0] network 2.2.2.9 0.0.0.0
[P1-ospf-1-area-0.0.0.0] quit
[P1-ospf-1] quit
# Configure S-PE.
[S-PE] interface loopback 0
[S-PE-LoopBack0] ip address 3.3.3.9 32
[S-PE-LoopBack0] quit
[S-PE] interface vlanif 30
[S-PE-Vlanif30] ip address 20.1.1.2 24
[S-PE-Vlanif30] quit
[S-PE] interface vlanif 40
[S-PE-Vlanif40] ip address 30.1.1.1 24
[S-PE-Vlanif40] quit
[S-PE] ospf 1
[S-PE-ospf-1] area 0.0.0.0
[S-PE-ospf-1-area-0.0.0.0] network 20.1.1.0 0.0.0.255
[S-PE-ospf-1-area-0.0.0.0] network 30.1.1.0 0.0.0.255
[S-PE-ospf-1-area-0.0.0.0] network 3.3.3.9 0.0.0.0
[S-PE-ospf-1-area-0.0.0.0] quit
[S-PE-ospf-1] quit
# Configure P2.
[P2] interface loopback 0
[P2-LoopBack0] ip address 4.4.4.9 32
[P2-LoopBack0] quit
[P2] interface vlanif 40
[P2-Vlanif40] ip address 30.1.1.2 24
[P2-Vlanif40] quit
[P2] interface vlanif 50
[P2-Vlanif50] ip address 40.1.1.1 24
[P2-Vlanif50] quit
[P2] ospf 1
[P2-ospf-1] area 0.0.0.0
[P2-ospf-1-area-0.0.0.0] network 30.1.1.0 0.0.0.255
[P2-ospf-1-area-0.0.0.0] network 40.1.1.0 0.0.0.255
[P2-ospf-1-area-0.0.0.0] network 4.4.4.9 0.0.0.0
[P2-ospf-1-area-0.0.0.0] quit
[P2-ospf-1] quit
# Configure U-PE2.
[U-PE2] interface loopback 0
[U-PE2-LoopBack0] ip address 5.5.5.9 32
[U-PE2-LoopBack0] quit
[U-PE2] interface vlanif 50
[U-PE2-Vlanif50] ip address 40.1.1.2 24
[U-PE2-Vlanif50] quit
[U-PE2] ospf 1
[U-PE2-ospf-1] area 0.0.0.0
[U-PE2-ospf-1-area-0.0.0.0] network 40.1.1.0 0.0.0.255
[U-PE2-ospf-1-area-0.0.0.0] network 1.1.1.9 0.0.0.0
[U-PE2-ospf-1-area-0.0.0.0] quit
[U-PE2-ospf-1] quit
After the configuration, run the display ip routing-table command on U-PE, P, or S-PE, and
you can see that the devices can learn each other's routes. Take the display on S-PE for example.
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 6 PWE3 Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
648

Table of Contents

Other manuals for Huawei quidway s7700

Related product manuals