l Run the display vsi remote ldp [ router-id ip-address ] [ pw-id pw-id ] command to check
information about the remote VSI.
l Run the display vpls connection [ ldp | vsi vsi-name ] [ down | up ] [ verbose ] command
to check information about the VPLS connection.
l Run the display mac-address dynamic slot-id command to check the dynamic MAC
address entries.
----End
Example
Run the display mpls static-l2vc command. You can view that the VC status is Up. For example:
<Quidway> display mpls static-l2vc interface gigabitethernet 2/0/0.1
*Client Interface : GigabitEthernet2/0/0.1 is up
AC Status : up
VC State : up
VC ID : 0
VC Type : VLAN
Destination : 1.1.1.9
Transmit VC Label : 100
Receive VC Label : 100
Control Word : Disable
VCCV Capability : alert lsp-ping bfd
Tunnel Policy : --
PW Template Name : --
Traffic Behavior : --
Main or Secondary : Main
VC tunnel/token info : 1 tunnels/tokens
NO.0 TNL Type : lsp , TNL ID : 0x10002
Create time : 0 days, 0 hours, 10 minutes, 45 seconds
UP time : 0 days, 0 hours, 10 minutes, 45 seconds
Last change time : 0 days, 0 hours, 10 minutes, 45 seconds
Run the display l2vpn ccc-interface vc-type static-vc up command. You can view that the VC
type is SVC and the status is Up. For example:
<Quidway> display l2vpn ccc-interface vc-type static-vc up
Total ccc-interface of SVC VC: 1
up (1), down (0)
Interface Encap Type State VC Type
GigabitEthernet1/0/0 vlan up static-vc
Run the display vsi [ name vsi-name ] [ verbose ] command. You can find the item "VSI State"
is displayed as "up". If verbose is selected, the item "Signaling" is displayed as "ldp" and the
item "VC State" is "up". This means that the configuration succeeds. For example:
<Quidway> display vsi name v100 verbose
***VSI Name : v100
Administrator VSI : no
Isolate Spoken : disable
VSI Index : 0
PW Signaling : ldp
Member Discovery Style : static
PW MAC Learn Style : unqualify
Encapsulation Type : vlan
MTU : 1500
Diffserv Mode : uniform
Mpls Exp : --
DomainId : 0
Domain Name :
Ignore AcState : disable
Multicast Fast switch : disable
Create Time : 0 days, 3 hours, 30 minutes, 31 seconds
VSI State : up
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 7 VPLS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
704
To Next Page
Loading...
