Huawei quidway s7700 - Page 756

Tunnel ID : 0x20021,
Broadcast Tunnel ID : 0x20021
Ckey : 0x3
Nkey : 0x1
Main PW Token : 0x20021
Slave PW Token : 0x0
Tnl Type : LSP
OutInterface : Vlanif20
Stp Enable : 0
Mac Flapping : 0
PW Last Up Time : 2009/02/03 00:32:43
PW Total Up Time : 0 days, 0 hours, 1 minutes, 14 seconds
CE1 (10.1.1.1) can ping CE2 (10.1.1.2) successfully.
<CE1> ping 10.1.1.2
PING 10.1.1.2: 56 data bytes, press CTRL_C to break
Reply from 10.1.1.2: bytes=56 Sequence=1 ttl=255 time=90 ms
Reply from 10.1.1.2: bytes=56 Sequence=2 ttl=255 time=77 ms
Reply from 10.1.1.2: bytes=56 Sequence=3 ttl=255 time=34 ms
Reply from 10.1.1.2: bytes=56 Sequence=4 ttl=255 time=46 ms
Reply from 10.1.1.2: bytes=56 Sequence=5 ttl=255 time=94 ms
--- 10.1.1.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 34/68/94 ms
----End
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
return
l Configuration file of CE2
#
sysname CE2
#
vlan batch 40
#
interface Vlanif40
ip address 10.1.1.2 255.255.255.0
#
interface GigabitEthernet2/0/0
port link-type trunk
port trunk allow-pass vlan 40
#
return
l Configuration file of PE1
#
sysname PE1
#
vlan batch 10 20
#
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 7 VPLS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
741