Huawei quidway s7700 - Page 768

return
l Configuration file of PE2
#
sysname PE2
#
vlan batch 30 40
#
mpls lsr-id 3.3.3.9
mpls
mpls te
mpls rsvp-te
mpls te cspf
#
mpls l2vpn
#
vsi a2 static
pwsignal ldp
vsi-id 2
peer 1.1.1.9 tnl-policy policy1
#
mpls ldp
#
mpls ldp remote-peer 1.1.1.9
remote-ip 1.1.1.9
#
interface Vlanif 30
ip address 100.2.1.2 255.255.255.0
ospf cost 1
mpls
mpls te
mpls rsvp-te
#
interface Vlanif40
l2 binding vsi a2
#
interface GigabitEtherne1/0/0
port link-type trunk
port trunk allow-pass vlan 40
#
interface GigabitEthernet2/0/0
port link-type trunk
port trunk allow-pass vlan 30
#
interface LoopBack1
ip address 3.3.3.9 255.255.255.255
#
interface Tunnel1/0/0
ip address unnumbered interface LoopBack1
tunnel-protocol mpls te
destination 1.1.1.9
mpls te tunnel-id 100
mpls te reserved-for-binding
mpls te commit
#
ospf 1
opaque-capability enable
area 0.0.0.0
network 3.3.3.9 0.0.0.0
network 100.2.1.0 0.0.0.255
mpls-te enable
#
tunnel-policy policy1
tunnel binding destination 1.1.1.9 te Tunnel1/0/0
#
return
l Configuration file of CE2
#
sysname CE2
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 7 VPLS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
753