Huawei quidway s7700 - Page 773

Remote VC Label : 27648
PW Type : label
Tunnel ID : 0x20022
Broadcast Tunnel ID : 0x20022
Ckey : 0x6
Nkey : 0x5
Main PW Token : 0x20022
Slave PW Token : 0x0
Tnl Type : LSP
OutInterface : Vlanif40
Stp Enable : 0
Mac Flapping : 0
PW Last Up Time : 2009/02/03 00:31:43
PW Total Up Time : 0 days, 0 hours, 2 minutes, 14 seconds
CE1, CE2, and CE3 can ping each other successfully. After you run the shutdown command
on the interface to which the VSI is bound of the UPE or PE, CE2 and CE3 cannot ping each
other successfully. This indicates that user data is transmitted through the PW of this VSI.
----End
Configuration Files
l Configuration file of the UPE
#
sysname UPE
#
vlan batch 10 20 30
#
mpls lsr-id 1.1.1.9
mpls
#
mpls l2vpn
#
vsi v123 static
pwsignal ldp
vsi-id 123
peer 2.2.2.9
#
mpls ldp
#
interface Vlanif10
l2 binding vsi v123
#
interface Vlanif20
l2 binding vsi v123
#
interface Vlanif30
ip address 100.1.1.1 255.255.255.0
mpls
mpls ldp
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 10
port hybrid tagged vlan 10
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 20
port hybrid tagged vlan 20
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 30
port hybrid tagged vlan 30
#
interface LoopBack1
ip address 1.1.1.9 255.255.255.255
#
ospf 1
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 7 VPLS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
758