------------------------------------------------------------------------------
PeerID Status LAM SsnRole SsnAge KASent/Rcv
------------------------------------------------------------------------------
2.2.2.9:0 Operational DU Passive 000:00:05 24/24
3.3.3.9:0 Operational DU Passive 000:00:01 5/5
------------------------------------------------------------------------------
TOTAL: 2 session(s) Found.
5. Configure static LSPs between UPEs and SPEs.
# Configure UPE1.
[UPE1] mpls lsr-id 4.4.4.9
[UPE1] mpls
[UPE1-mpls] quit
[UPE1] interface vlanif 20
[UPE1-Vlanif20] mpls
[UPE1-Vlanif20] quit
[UPE1] static-lsp ingress UPE1toSPE1 destination 1.1.1.9 32 nexthop 100.1.3.1
out-label 20
[UPE1] static-lsp egress SPE1toUPE1 incoming-interface vlanif 20 in-label 30
# Configure UPE2.
[UPE2] mpls lsr-id 5.5.5.9
[UPE2] mpls
[UPE2-mpls] quit
[UPE2] interface vlanif 50
[UPE2-Vlanif50] mpls
[UPE2-Vlanif50] quit
[UPE2] static-lsp ingress UPE2toSPE2 destination 3.3.3.9 32 nexthop 100.1.4.1
out-label 40
[UPE2] static-lsp egress SPE2toUPE2 incoming-interface vlanif 50 in-label 50
# Configure SPE1.
[SPE1] static-lsp ingress SPE1toUPE1 destination 4.4.4.9 32 nexthop 100.1.3.2
out-label 30
[SPE1] static-lsp egress UPE1toSPE1 incoming-interface vlanif 20 in-label 20
# Configure SPE2.
[SPE2] static-lsp ingress SPE2toUPE2 destination 5.5.5.9 32 nexthop 100.1.4.2
out-label 50
[SPE2] static-lsp egress UPE2toSPE2 incoming-interface vlanif 50 in-label 40
6. Enable MPLS L2VPN on UPEs and configure the UPEs to access SPEs through static
VLLs.
# Configure UPE1.
<UPE1> system-view
[UPE1] mpls l2vpn
[UPE1-l2vpn] quit
[UPE1] interface vlanif 10
[UPE1-Vlanif10] mpls static-l2vc destination 1.1.1.9 transmit-vpn-label 100
receive-vpn-label 100
[UPE1-Vlanif10] quit
# Configure UPE2.
<UPE2> system-view
[UPE2] mpls l2vpn
[UPE2-l2vpn] quit
[UPE2] interface vlanif 60
[UPE2-Vlanif60] mpls static-l2vc destination 3.3.3.9 transmit-vpn-label 100
receive-vpn-label 100
[UPE2-Vlanif60] quit
7. Enable MPLS L2VPN on SPEs and bind VSIs.
# Configure SPE1.
<SPE1> system-view
[SPE1] mpls l2vpn
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 7 VPLS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
765
To Next Page
Loading...
