Huawei quidway s7700 - Page 783

0000-c101-0102 V100 Vlanif20 dynamic 3/3366
Total matching items displayed = 2
After VLANIF 20 of SPE1 is shut down, the VSI bound to the static VLL becomes Down.
Check MAC addresses learnt by the VSI on SPE2, and you can find that one MAC address
learned from VLANIF 20 is deleted.
<SPE2> display mac-address dynamic
MAC Address VLAN/ PEVLAN CEVLAN Port Type LSP/LSR-ID
VSI/SI
----------------------------------------------------------------------------
Total matching items displayed = 0
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
vlan batch 10
#
interface Vlanif10
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 10
#
return
l Configuration file of CE2
#
sysname CE2
#
interface Vlanif60
ip address 10.1.1.2 255.255.255.0
#
interface GigabitEthernet1/0/0
port link-type trunk
port trunk allow-pass vlan 60
#
return
l Configuration file of UPE1
#
sysname UPE1
#
vlan batch 10 20
#
mpls lsr-id 4.4.4.9
mpls
#
mpls l2vpn
#
interface Vlanif10
mpls static-l2vc destination 1.1.1.9 transmit-vpn-label 100 receive-vpn-label
100
#
interface Vlanif20
ip address 100.1.3.2 255.255.255.0
mpls
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 20
port hybrid tagged vlan 20
#
interface GigabitEthernet2/0/0
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 7 VPLS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
768