Huawei quidway s7700 - Page 789

# Configure P.
<P> system-view
[P] ospf
[P-ospf-1] area 0
[P-ospf-1-area-0.0.0.0] network 2.2.2.9 0.0.0.0
[P-ospf-1-area-0.0.0.0] network 100.1.1.0 0.0.0.255
[P-ospf-1-area-0.0.0.0] network 100.1.2.0 0.0.0.255
[P-ospf-1-area-0.0.0.0] quit
[P-ospf-1] quit
# Configure SPE2.
<SPE2> system-view
[SPE2] ospf
[SPE2-ospf-1] area 0
[SPE2-ospf-1-area-0.0.0.0] network 3.3.3.9 0.0.0.0
[SPE2-ospf-1-area-0.0.0.0] network 100.1.2.0 0.0.0.255
[SPE2-ospf-1-area-0.0.0.0] network 100.1.4.0 0.0.0.255
[SPE2-ospf-1-area-0.0.0.0] quit
[SPE2-ospf-1] quit
# Configure UPE1.
<UPE1> system-view
[UPE1] ospf
[UPE1-ospf-1] area 0
[UPE1-ospf-1-area-0.0.0.0] network 4.4.4.9 0.0.0.0
[UPE1-ospf-1-area-0.0.0.0] network 100.1.3.0 0.0.0.255
[UPE1-ospf-1-area-0.0.0.0] quit
[UPE1-ospf-1] quit
# Configure UPE2.
<UPE2> system-view
[UPE2] ospf
[UPE2-ospf-1] area 0
[UPE2-ospf-1-area-0.0.0.0] network 5.5.5.9 0.0.0.0
[UPE2-ospf-1-area-0.0.0.0] network 100.1.4.0 0.0.0.255
[UPE2-ospf-1-area-0.0.0.0] quit
[UPE2-ospf-1] quit
Step 4 Configure basic MPLS functions and LDP.
# Configure SPE1.
[SPE1] mpls lsr-id 1.1.1.9
[SPE1] mpls
[SPE1-mpls] quit
[SPE1] mpls ldp
[SPE1-mpls-ldp] quit
[SPE1] interface vlanif 10
[SPE1-Vlanif10] mpls
[SPE1-Vlanif10] mpls ldp
[SPE1-Vlanif10] quit
[SPE1] interface vlanif 30
[SPE1-Vlanif30] mpls
[SPE1-Vlanif30] mpls ldp
[SPE1-Vlanif30] quit
# Configure P.
[P] mpls lsr-id 2.2.2.9
[P] mpls
[P-mpls] quit
[P] mpls ldp
[P-mpls-ldp] quit
[P] interface vlanif 10
[P-Vlanif10] mpls
[P-Vlanif10] mpls ldp
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 7 VPLS Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
774