Figure 8-4 Configuring the mVSI
NPE1
NPE2
UPE
GE1/0/1
10.1.1.2/24
GE1/0/1
10.1.2.2/24
GE1/0/1
VLANIF 100
10.1.1.1/24
GE1/0/2
VLANIF 200
10.1.2.1/24
PW for mVRRP
PW for normal VRRP
GE1/0/1
VLAN101
LAN Switch
PC1
192.168.2.3/24
Gateway:192.168.2.254
GE1/0/0
GE1/0/0
mVRRP VRID1
VSI
mVSI
Device
Name
Interface Name VLANIF interface IP Address
UPE Loopback1 - 1.1.1.1/32
UPE GE1/0/0 - -
UPE GE1/0/1 VLANIF 100 10.1.1.1/24
UPE GE1/0/2 VLANIF 200 10.1.2.1/24
NPE1 Loopback1 - 2.2.2.2/32
NPE2 Loopback1 - 3.3.3.3/32
Configuration Roadmap
NOTE
In the networking diagram, the UPE refers to the S7700. Only the configurations on the S7700 are provided
here.
The configuration roadmap is as follows:
1. Configure the routing and MPLS functions.
l Set the IP addresses for the interfaces on the UPE.
Quidway S7700 Smart Routing Switch
Configuration Guide - VPN 8 VPLS Convergence Configuration
Issue 01 (2011-07-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
812
To Next Page
Loading...
