How to troubleshoot puckered embroidery design on Husqvarna Sewing Machine?
To address a puckered embroidery design on your Husqvarna sewing machine, ensure you are using the proper stabilizer for your technique or fabric type.
What to do if the Husqvarna Sewing Machine will not sew?
If your Husqvarna sewing machine will not sew, check that all plugs are securely inserted into the machine and the wall socket.
How to fix distorted embroidery design on my Husqvarna VIKING Designer RUBY 90 Sewing Machine?
To fix a distorted embroidery design on your Husqvarna sewing machine: * Ensure the fabric is tightly hooped; use hoop clips for larger hoops. * Hoop the fabric so the inner hoop exactly matches the outer hoop. * Clear the area around the embroidery unit. * Make sure the hoop connector is fully inserted into the hoop attachment on the embroidery arm.
What to do if my Husqvarna Sewing Machine screen and/or function buttons do not respond?
The sockets and function buttons on the Husqvarna machine can be sensitive to static electricity. If the screen does not respond to touch, turn the machine OFF and then ON again. If the problem persists, contact your authorized HUSQVARNA® VIKING® retailer.
Why is my Husqvarna Sewing Machine bobbin thread breaking?
If the bobbin thread is breaking on your Husqvarna sewing machine, consider the following: * Use only bobbins especially designed for the DESIGNER RUBY™90 machine. * Check the bobbin thread. * Change the needle plate. * Clean lint from bobbin area and use only the original bobbins approved for this model. * Wind a new bobbin.
What to do if my Husqvarna VIKING Designer RUBY 90 Sewing Machine is not embroidering?
If your Husqvarna sewing machine will not embroider, ensure that: * The embroidery unit is properly attached into the socket. * The correct hoop is properly attached.
Why is my Husqvarna VIKING Designer RUBY 90 seam having uneven stitches?
If your Husqvarna sewing machine seam has uneven stitches, try the following: * Check needle thread tension. Remove the thread completely and rethread the machine. * Change the thread. * Check bobbin winding. * Insert a proper needle correctly. Use a needle suitable for selected fabric.
What to do if my Husqvarna VIKING Designer RUBY 90 Sewing Machine does not feed fabric?
If your Husqvarna sewing machine isn't feeding fabric, here's what you can do: * Remove the thread completely and rethread the machine. * Remove the needle plate and clean the feed teeth with the brush. * Turn off free motion setting in sewing mode. * Ensure the feed teeth are not set to the down position in the settings menu. * Attach the correct presser foot.
Why does my Husqvarna VIKING Designer RUBY 90 Sewing Machine keep skipping stitches?
If your Husqvarna sewing machine is skipping stitches, try these solutions: * Insert the needle correctly. * Use needle system 130/705 H. Use a needle suitable for selected fabric and thread. * Insert a new needle. * Remove the thread completely and rethread the machine. * Attach the correct presser foot. * Change the needle. * Attach Sensor Q-Foot.
What to do if my Husqvarna VIKING Designer RUBY 90 Sewing Machine displays a pop-up message to gently remove any thread stuck in the automatic needle threader?
General| Type | Computerized Sewing and Embroidery Machine |
|---|---|
| Display | Color Touch Screen |
| Maximum Stitch Width | 9 mm |
| Maximum Stitch Length | 5 mm |
| Built-in Memory | Yes |
| USB Connectivity | Yes |
| Bobbin Winding | Automatic |
| Needle Threader | Automatic |
| Lighting | LED |
| Automatic Thread Cutter | Yes |
| Speed Control | Yes |
| Presser Feet | Included |
| Buttonhole Styles | Multiple |
Introduction to the user guide, finding topics, and navigating through its content.
Identification of the machine's main parts and components from various views.
Details on the needle area, left side, and right side of the machine.
Information on accessory storage and the embroidery unit.
Explanation of the various function buttons and their operations.
Overview of included accessories, hoops, and different presser feet.
General overview of available stitches, including utility stitches.
How to use touch screen gestures and the smart toolbox feature.
Steps for safely unpacking the machine and connecting power and foot control.
Initial setup for WiFi, mySewnet™ Cloud, and related services.
Explanation of LED lights, free arm, and manual thread cutters.
Procedures for threading the machine and winding bobbins.
Information about needles, combinations, and threading procedures.
Introduction to embroidery preparations, unit, hoops, and designs.
Procedures for hooping fabric and attaching the embroidery unit.
Explanation of frequently used functions like OK, Cancel, and Edit.
Description of the navigation bar including WiFi and mySewnet™ buttons.
Access to mySewnet™ features, firmware updates, and home screen.
Using quick help, accessing settings, and toggling modes.
Steps to connect to WiFi networks and manage connections.
Methods for updating machine firmware via WiFi or USB.
Introduction to mySewnet™ services, account, cloud, and software.
General introduction to the home screen interface and its main features.
Information related to user accounts, machine nickname, and machine tips.
Access to the mySewnet™ blog and options to filter content.
Using search, starting new projects, continuing, and loading smart saves.
Displays project details, instructions, and how to play animations.
Guide to the SEWING ADVISOR™, Fabric Selection, and Technique Groups.
Guides for QUILT ADVISOR™ and EMBROIDERY ADVISOR™ features.
Access to stabilizer guides, quick start guides, and instructions.
Initial steps for beginning to sew on the machine.
Overview of the sewing mode and how to choose stitches.
How to modify stitch parameters, save settings, and balance stitches.
Settings for free motion sewing techniques like spring action and floating feet.
Overview of fundamental sewing methods like seams, overcast, and basting.
How to sew manual, automatic, and corded buttonholes.
Introduction to menus for dimensional, theme, embellished, and tapering stitches.
Explanations of common messages encountered during sewing.
Explanation of the embroidery editing interface and its functions.
Setting grid/background colors and loading embroidery files.
How to select, arrange, group, and edit designs.
Precisely placing designs on fabric using wizards and tools.
Procedures for saving, transferring, and modifying embroidery designs.
How to change thread colors within embroidery designs.
Creating text designs for embroidery, including shaping and spacing.
Creating custom designs using shapes and applying appliqué techniques.
Adjusting design size and key considerations for resizing.
Explanations of common messages encountered during embroidery editing.
Explanation of the embroidery stitch out interface and its functions.
Initial configuration before starting embroidery: hoop, plate, basting, foot.
Explanation of the deLuxe™ system for embroidery thread control.
Managing color information and adjusting the view of the embroidery.
Controls for hoop positioning and navigating through embroidery stitches.
Precisely placing designs on fabric using wizards and touch controls.
Saving embroidery progress automatically via Smart Save and Auto Save.
Displaying thread colors and moving between color blocks.
Managing time estimates and optimizing color blocks for stitching.
Features like basting options and explanations of stitch out messages.
Introduction to creating and managing stitch programs.
Step-by-step guides for creating new programs and editing existing ones.
Tools for inserting, adjusting, deleting, and duplicating program components.
Procedures for saving and running created stitch programs.
Explanations of messages related to stitch program creation and limits.
Adjusting sewing parameters temporarily for a project.
Settings for automatic thread cutting and stitch tying.
Features to prevent needle breakage and limit stitch width.
Settings for twin needles and feed teeth movement.
Adjusting embroidery parameters temporarily for a project.
Machine's default configurations for sewing and embroidery.
General machine preferences: language, audio, display, and clock.
Managing WiFi connections and mySewnet™ account settings.
Introduction to the file management system for designs, fonts, and stitches.
Supported file types and how to navigate the file manager.
Procedures for opening, selecting, copying, moving, and deleting files.
Navigating and organizing folders within the file manager.
Switching between file views and filtering files by type.
Explanations of alerts and messages encountered in the file manager.
How to clean the machine's exterior and internal areas.
Detailed cleaning instructions for the bobbin area and needle plate.
How to correctly reinstall the needle plate.
Solutions for general machine problems and specific component failures.
Diagnosing and fixing skipped stitches and feed irregularities.
Solutions for thread breaks, bobbin issues, and seam problems.
Diagnosing issues with distorted or puckered embroidery designs.
Resolving WiFi and network connection problems.
Troubleshooting cloud sync issues and details on machine servicing.
Detailed technical data of the machine, including dimensions and power.
Critical safety guidelines for machine operation and usage.
Specific warnings related to electric shock risks during operation.
Warnings about physical safety risks like burns, fire, and injury.
Instruction to retain safety information for future reference.
Safety advice specific to European and other regions.
Guidelines for servicing the machine's double insulation system.
Information regarding software licenses and terms.
To Next Page