364 Implementing the IBM Storwize V5000 Gen2 with IBM Spectrum Virtualize V8.1
Mapping storage
Follow the instructions that are shown in the Map Storage panel that is shown in Figure 7-16
and click Next. Record all of the details carefully because the information is used in later
panels. Table 7-2 shows an example table for you to capture the information that relates to the
external storage system LUs.
Figure 7-16 Directions to record migration data
Table 7-2 Example table to capture the external LU information
LU name Controller Array SCSI ID Host name Capacity
V3700external0 Node2 V3700 0 50 GiB
V3700external1 Node1 V3700 1 50 GiB
V3700external2 Node2 V3700 2 50 GiB
V3700external3 Node1 V3700 3 50 GiB
V3700external4 Node2 V3700 4 50 GiB
V3700external5 Node1 V3700 5 50 GiB
SCSI ID: Record the SCSI ID of the LUs to which the host is originally mapped. Certain
operating systems do not support the change of the SCSI ID during the migration.
To Next Page
Loading...
