Icom IC-7700 - Page 207

14-7
D Command table (continued)
14
CONTROL COMMAND
Cmd. Sub Cmd. Data Description
1A 05 0113 00 to 02 Send/read scope sweep speed for ±100
kHz span (00=Slow, 01=Mid., 02=Fast)
0114 00 to 02 Send/read scope sweep speed for ±250
kHz span (00=Slow, 01=Mid., 02=Fast)
0115
see p. 14-11 Send/read scope edge frequencies
for 0.03 to 1.60 MHz band
0116
see p. 14-11 Send/read scope edge frequencies
for 1.60 to 2.00 MHz band
0117
see p. 14-11 Send/read scope edge frequencies
for 2.00 to 6.00 MHz band
0118
see p. 14-11 Send/read scope edge frequencies
for 6.00 to 8.00 MHz band
0119
see p. 14-11 Send/read scope edge frequencies
for 8.00 to 11.00 MHz band
0120
see p. 14-11 Send/read scope edge frequencies
for 11.00 to 15.00 MHz band
0121
see p. 14-11 Send/read scope edge frequencies
for 15.00 to 20.00 MHz band
0122
see p. 14-11 Send/read scope edge frequencies
for 20.00 to 22.00 MHz band
0123
see p. 14-11 Send/read scope edge frequencies
for 22.00 to 26.00 MHz band
0124
see p. 14-11 Send/read scope edge frequencies
for 26.00 to 30.00 MHz band
0125
see p. 14-11 Send/read scope edge frequencies
for 30.00 to 45.00 MHz band
0126
see p. 14-11 Send/read scope edge frequencies
for 45.00 to 60.00 MHz band
0127 00/01 Send/read auto voice monitor set
(00=OFF, 01=ON)
0128 03 to 10 Send/read voice memory short
play time (03=3 sec. to 10=10 sec.)
0129 05 to 15 Send/read voice memory normal
record time (05= 5 sec. to 30=30 sec.)
0130 00 Normal selection for contest number
style
01 “ 190→ANO” selection for contest
number style
02 “ 190→ANT” selection for contest
number style
03 “ 90→NO” selection for contest number
style
04 “ 90→NT” selection for contest number
style
0131 01 to 04 Send/read count up trigger channel
(01=M1, 02=M2, 03=M3, 04=M4)
0132 0001 to
9999
Send/read present number
(0001=1, 9999=9999)
0133 01 to 60 Send/read CW keyer repeat time
(01=1 sec. to 60=60 sec.)
0134 28 to 45 Send/read CW keyer dot/dash ratio
(28=1:1:2.8 to 45=1:1:4.5)
0135 00 to 03 Send/read rise time
(00=2 msec., 01=4 msec.,
02=6 msec., 03=8 msec.)
0136 00/01 Send/read paddle polarity
(00=Normal, 01=Reverse)
0137 00 to 02 Send/read keyer type (00=Straight,
01=Bug-key, 02=ELEC-Key)
0138 00/01 Send/read mic. up/down keyer set
(00=OFF, 01=ON)
0139 00 to 03 Send/read FFT scope averaging set for
RTTY decoder
(00=OFF, 01=2, 02=3, 03=4)
0140
see p. 14-11 Send/read FFT scope waveform
color set for RTTY decoder
0141 00/01 Send/read RTTY decode USOS
(00=OFF, 01=ON)
Cmd. Sub Cmd. Data Description
1A 05 0142 00/01 Send/read RTTY decode new line code
(00=CR,LF,CR+LF, 01=CR+LF)
0143 00 to 02 Send/read RTTY diddle (00=OFF,
01=Blank, 02=LTRS (Letter code))
0144 00/01 Send/read RTTY TX USOS
(00=OFF, 01=ON)
0145 00/01 Send/read RTTY auto CR+LF by TX
(00=OFF, 01=ON)
0146 00/01 Send/read RTTY time stamp set
(00=OFF, 01=ON)
0147 00/01 Send/read clock selection for time
stamp(0=Local time, 1=CLOCK2)
0148 00/01 Send/read frequency stamp
(00=OFF, 01=ON)
0149
see p. 14-11 Send/readreceivedtextfontcolor
0150
see p. 14-11 Send/readtransmittedtextfontcolor
0151
see p. 14-11 Send/readtimestamptextfontcolor
0152
see p. 14-11 Send/readtextfontcolorinTXbuffer
0153 – Send/read FFT scope averaging set for
PSK decoder
(00=OFF, 01=2, 02=3, 03=4)
0154
see p. 14-11 Send/read FFT scope waveform
color set for PSK decoder
0155 00/01 Send/read PSK AFC function tuning
range (00=±8 Hz, 01=±15 Hz)
0156 00/01 Send/read PSK time stamp set
(00=OFF, 01=ON)
0157 00/01 Send/read clock selection for time
stamp (00=Local time, 01=CLOCK2)
0158 00/01 Send/read frequency stamp
(00=OFF, 01=ON)
0159
see p. 14-11 Send/readreceivedtextfontcolorfor
PSK decoder
0160
see p. 14-11 Send/readtransmittedtextfontcolor
(PSK)
0161
see p. 14-11 Send/readtimestamptextfontcolor
(PSK)
0162
see p. 14-11 Send/readtextfontcolorinTXbuffer
(PSK)
0163 00/01 Send/read scan speed
(00=Low, 01=High)
0164 00/01 Send/read scan resume
(00=OFF, 01=ON)
0165
see p. 14-12 Send/read antenna selection for
0.03 to 1.60 MHz band
0166
see p. 14-12 Send/read antenna selection for
1.60 to 2.00 MHz band
0167
see p. 14-12 Send/read antenna selection for
2.00 to 6.00 MHz band
0168
see p. 14-12 Send/read antenna selection for
6.00 to 8.00 MHz band
0169
see p. 14-12 Send/read antenna selection for
8.00 to 11.00 MHz band
0170
see p. 14-12 Send/read antenna selection for
11.00 to 15.00 MHz band
0171
see p. 14-12 Send/read antenna selection for
15.00 to 20.00 MHz band
0172
see p. 14-12 Send/read antenna selection for
20.00 to 22.00 MHz band
0173
see p. 14-12 Send/read antenna selection for
22.00 to 26.00 MHz band
0174
see p. 14-12 Send/read antenna selection for
26.00 to 30.00 MHz band
0175
see p. 14-12 Send/read antenna selection for
30.00 to 45.00 MHz band
0176
see p. 14-12 Send/read antenna selection for
45.00 to 60.00 MHz band