Icom ID-E880

D Controller’s attachment/detachment
You can attach or detach the controller to/from the main unit
as below.
• Attach the controller
± Slide the controller in the direction of the arrow until the
controller is locked and makes a ‘click’ sound.
• Detach the controller
q
w
e
Release latch
D Separation cable connection
Using the supplied separation cable (3.4 m), the controller can
be separated from the main
unit, doubling as a remote con-
troller.
Connect the controller and the main unit using with the sup-
plied separation cable as follows.
Controller
Main unit
Single mount connector
CAUTION:
NEVER short the terminals of the single mount connectors
for main unit or controller during separate operation. This
will cause a transceiver malfunction or damage the trans-
ceiver.
IV
QUICK REFERENCE GUIDE
QUICK REFERENCE